Services – My Most Valuable Advice

The Procedure Used During Jump-Starting Your Car The knowledge of jump starting a car should be known by everyone since in any car the battery can be dead anytime. There are professional who are well experienced on the issues concerning car jump start who you should contact when you are not getting everything right because however much it can be easy, if you make an error it can be hazardous. The main thing to have is jumper cables before you are set for jump starting your car. Tips below are to help in the safest ways on how to jump start your car. Your owner’s manual are to help you locate where your battery is or if you know where it is located the batter. Place your car next to the car providing the jump. The positioning of the car providing the jump next to your car will help in ensuring that the jumper cables reach your car battery without any problem. The cars should be in a position where the jumpers cable should be able to reach their both batteries. The hoods of the two cars should remain opened and also the car giving the jump must remain shut off. Onto the battery of the car providing the jump, clamp one end of the jumper cables. There are two clamps of a jumper cable; one part is ideated red to stand for positive and black to stand for negative. The clamps Should be connected as follows; the red clam to the red terminal of the battery and the black clamp to the black terminal of the battery. The connection of the clamps according to the colors should be made in both the car that is providing the jump and your car and also avoid so much the contact between the two different clamps to avoid dangerous electrical spark.
A Brief History of Services
By connecting the black clamp to the engine, the spark produced around the battery will automatically be reduced. After all these procedures, you can now start the engine of the car giving you the jump and leave it to run for about ten minutes to help in the charging the dead battery. Check whether your car can now start by turning on the engine of your car.
5 Key Takeaways on the Road to Dominating Automobiles
There is a way you should remove the clamps from both batteries, that is, remove the black clamps and then followed by the red clamp after ensuring that your car engine can start. To ensure that your vehicle is safe after jump starting by taking it to a professional car technician.